Skip to content

ZoeHelper Functions

The ZoeHelper functions provide convenient abstractions for accessing Zoe functionality from within contracts. In most cases, you pass a reference to zcf or one or more seats.

All of the ZoeHelper functions are described below. To use any of them, import them directly from @agoric/zoe/src/contractSupport/index.js. For example, the following imports the two ZoeHelper functions assertIssuerKeywords() and assertProposalShape():

js
import {
  assertIssuerKeywords,
  assertProposalShape
} from '@agoric/zoe/src/contractSupport/index.js';

atomicRearrange(zcf, transfers)

Asks Zoe to rearrange the Allocations among the seats mentioned in transfers. transfers are a set of changes to Allocations that must satisfy several constraints. If these constraints are all met, then the reallocation happens atomically. Otherwise an error is thrown and none of the proposed changes has any effect. The constraints are as follows.

  • All the mentioned seats are still live.

  • There aren't any outstanding stagings for any of the mentioned seats.

    Stagings are a reallocation mechanism that has been deprecated in favor of this atomicRearrange() function. To prevent confusion, each reallocation can only be expressed in the old way or the new way, but not a mixture.

  • Overall conservation must be maintained. In other words, the reallocated Amounts must balance out.

  • Offer Safety is preserved for each seat. That means reallocations can only take assets from a seat as long as either it gets the assets described in the want section of its proposal, or it retains all of the assets specified in the give section of the proposal. This constraint applies to each seat across the entire atomicRearrangement, not to the individual TransferParts.

Note that you can construct the TransferParts that make up the transfers array manually, or for transfers that only include one seat, you can use the helper functions fromOnly() and toOnly() to create TransferParts that only use a subset of the fields.

fromOnly(fromSeat, fromAmounts)

Returns a TransferPart which only takes fromAmounts from fromSeat. TransferParts are used as part of the transfer argument of the atomicRearrange() function.

toOnly(toSeat, toAmounts)

Returns a TransferPart which only gives toAmount to toSeat. TransferParts are used as part of the transfer argument of the atomicRearrange() function.

atomicTransfer(zcf, fromSeat, toSeat, fromAmounts, toAmounts?)

Asks Zoe to rearrange the Allocations among the seats mentioned in fromSeat and toSeat. The reallocations must satisfy several constraints. If these constraints are all met, then the reallocation happens atomically. Otherwise an error is thrown and none of the proposed changes has any effect. The constraints are as follows.

  • All the mentioned seats are still live.

  • There aren't any outstanding stagings for any of the mentioned seats.

    Stagings are a reallocation mechanism that has been deprecated in favor of this atomicRearrange() function. To prevent confusion, each reallocation can only be expressed in the old way or the new way, but not a mixture.

  • Overall conservation must be maintained. In other words, the reallocated Amounts must balance out.

  • Offer Safety is preserved for each seat. That means reallocations can only take assets from a seat as long as either it gets the assets described in the want section of its proposal, or it retains all of the assets specified in the give section of the proposal. This constraint applies to each seat across the entire atomicRearrangement, not to the individual TransferParts.

When you don't specify toAmounts, it means that the fromAmount will be taken from fromSeat and given to toSeat.

assertIssuerKeywords(zcf, expected)

Checks that the Keywords in the expected argument match what the contract expects. The function throws an error if incorrect or extra Keywords are passed in, or if there are Keywords missing. The Keyword order is irrelevant.

js
import { assertIssuerKeywords } from '@agoric/zoe/src/contractSupport/index.js';

// Proposals for this contract instance use keywords 'Asset' and 'Price'
assertIssuerKeywords(zcf, harden(['Asset', 'Price']));

satisfies(zcf, seat, update)

Returns true if an update to a seat's currentAllocation satisfies its proposal.want. Note this is half of the offer safety check; it does not check if the Allocation constitutes a refund. The update is merged with currentAllocation such that update's values prevail if the Keywords are the same. If they are not the same, the Keyword and value is just added to the currentAllocation.

The following example code uses satisfies() to define a satisfiedBy() comparison function between two seats. It checks if the second seat argument's currentAllocation satisfies the first seat argument's proposal.want.

It then calls satisfiedBy() on both orders of the two seats. If both satisfy each other, it does a swap on them.

js
import { satisfies } from '@agoric/zoe/src/contractSupport/index.js';

const satisfiedBy = (xSeat, ySeat) =>
  satisfies(zcf, xSeat, ySeat.getCurrentAllocation());

if (satisfiedBy(offer, seat) && satisfiedBy(seat, offer)) {
  swap(zcf, seat, offer);
}

swap(zcf, leftSeat, rightSeat)

For both seats, everything a seat wants is given to it, having been taken from the other seat. swap() exits both seats. Use swap() when all of these are true:

  • Both seats use the same Keywords.
  • The seats' wants can be fulfilled from the other seat.
  • No further seat interaction is desired.

If the two seats can trade, they swap their compatible assets, exiting both seats. It returns the message The offer has been accepted. Once the contract has been completed, please check your payout.

Any surplus remains with whichever seat has the surplus. For example if seat A gives 5 Quatloos and seat B only wants 3 Quatloos, seat A retains 2 Quatloos.

If the swap fails, no assets transfer, and both leftSeat and rightSeat are exited.

js
import { swap } from '@agoric/zoe/src/contractSupport.js';

swap(zcf, firstSeat, secondSeat);

swapExact(zcf, leftSeat, rightSeat)

For both seats, everything a seat wants is given to it, having been taken from the other seat. swapExact() exits both seats. Use swapExact() when both of these are true:

  • The seats' wants can be fulfilled from the other seat.
  • No further seat interaction is desired.

Note that unlike the swap() function, leftSeat and rightSeat don't necessarily use the same Keywords.

swapExact() is a special case of swap() such that it is successful only if both seats gain everything they want and lose everything they were willing to give. It is only good for exact and entire swaps where each seat wants everything that the other seat has. The benefit of using this method is that the Keywords of each seat do not matter.

If the two seats can trade, they swap their compatible assets, exiting both seats. It returns the message The offer has been accepted. Once the contract has been completed, please check your payout.

If the swap fails, no assets transfer, and both leftSeat and rightSeat are exited.

js
import { swapExact } from '@agoric/zoe/src/contractSupport/index.js';

const swapMsg = swapExact(zcf, zcfSeatA, zcfSeatB);

fitProposalShape(seat, proposalShape)

Checks the seat's proposal against the proposalShape argument. If the proposal does not match proposalShape, the seat will be exited and all Payments will be refunded.

assertProposalShape(seat, expected)

  • seat: ZCFSeat
  • expected: ExpectedRecord
  • Returns: None.

Note: Most uses of assertProposalShape are better expressed using the proposalShape argument of zcf.makeInvitation().

Checks the seat's proposal against an expected record that says what shape of proposal is acceptable.

By "shape", we mean the give, want, and exit rule Keywords of the proposal must be equal to those in expected. Note that exit rule Keywords are optional in expected. Also, none of the values of those Keywords are checked.

This ExpectedRecord is like a Proposal, but the amounts in want and give should be null; the exit clause should specify a rule with null contents. If the client submits a Proposal which does not match these expectations, that proposal is rejected (and refunded).

js
import { assertProposalShape } from '@agoric/zoe/src/contractSupport/index.js';

const sellAssetForPrice = harden({
  give: { Asset: null },
  want: { Price: null }
});
const sell = seat => {
  assertProposalShape(seat, sellAssetForPrice);
  buySeats = swapIfCanTradeAndUpdateBook(buySeats, sellSeats, seat);
  return 'Trade Successful';
};

assertNatAssetKind(zcf, brand)

Asserts that the brand is AssetKind.NAT. This means the corresponding Mint creates fungible assets.

If false throws with message brand must be AssetKind.NAT.

js
import { assertNatAssetKind } from '@agoric/zoe/src/contractSupport/index.js';

assertNatAssetKind(zcf, quatloosBrand);

depositToSeat(zcf, recipientSeat, amounts, payments)

Deposits payments such that their amounts are reallocated to a seat. The amounts and payments records must have corresponding Keywords.

If the seat has exited, aborts with the message The recipientSeat cannot have exited.

On success, returns the exported and settable depositToSeatSuccessMsg which defaults to Deposit and reallocation successful.

js
import { depositToSeat } from '@agoric/zoe/src/contractSupport/index.js';

await depositToSeat(
  zcf,
  zcfSeat,
  { Dep: quatloos(2n) },
  { Dep: quatloosPayment }
);

withdrawFromSeat(zcf, seat, amounts)

Withdraws payments from a seat. Note that withdrawing the amounts of the payments must not and cannot violate offer safety for the seat. The amounts and payments records must have corresponding Keywords.

If the seat has exited, aborts with the message The seat cannot have exited.

Unlike depositToSeat(), a PaymentPKeywordRecord is returned, not a success message.

js
import { withdrawFromSeat } from '@agoric/zoe/src/contractSupport/index.js';

const paymentKeywordRecord = await withdrawFromSeat(zcf, zcfSeat, {
  With: quatloos(2n)
});

saveAllIssuers(zcf, issuerKeywordRecord)

  • zcf: ZoeContractFacet
  • issuerKeywordRecord: IssuerKeywordRecord
  • Returns: Promise<PaymentPKeywordRecord>

Saves all of the issuers in an IssuersKeywordRecord to ZCF, using the method zcf.saveIssuer().

This does not error if any of the Keywords already exist. If the Keyword is already present, it is ignored.

js
import { saveAllIssuers } from '@agoric/zoe/src/contractSupport/index.js';

await saveAllIssuers(zcf, { G: gIssuer, D: dIssuer, P: pIssuer });

offerTo(zcf, invitation, keywordMapping, proposal, fromSeat, toSeat, offerArgs)

  • zcf: ZoeContractFacet
  • invitation: ERef<Invitation>
  • keywordMapping: KeywordRecord
  • proposal: Proposal
  • fromSeat: ZCFSeat
  • toSeat: ZCFSeat
  • offerArgs: Object
  • Returns: OfferToReturns

offerTo() makes an offer from your current contract instance (which we'll call "contractA") to another contract instance (which we'll call "contractB"). It withdraws offer payments from the fromSeat in contractA and deposits any payouts in the toSeat, also a contractA seat. Note that fromSeat and toSeat may be the same seat, which is the default condition (i.e. toSeat is an optional parameter defaulting to fromSeat's value). offerTo() can be used to make an offer from any contract instance to any other contract instance, as long as the fromSeat allows the withdrawal without violating offer-safety. To be clear, this does mean that contractA and contractB do not have to be instances of the same contract.

zcf is contractA's Zoe contract facet. The invitation parameter is an Invitation to contractB. The proposal parameter is the proposal part of the offer made to contractB.

keywordMapping is a record of the Keywords used in contractA mapped to the Keywords for contractB. Note that the pathway to deposit the payout back to contractA reverses this mapping. It looks like this, where the Keywords are from the contracts indicated by using "A" or "B" in the Keyword name.

js
// Map the keywords in contractA to the keywords in contractB
const keywordMapping = harden({
  TokenA1: 'TokenB1',
  TokenA2: 'TokenB2'
});

offerArgs is an object that can be used to pass additional arguments to the offerHandler of contractB's contract code. Which arguments should be included within offerArgs is determined by the contract in question; each contract can define whatever additional arguments it requires. If no additional arguments are defined for a particular contract, then the offerArgs argument can be omitted entirely. It is up to the contract code how it chooses to handle any unexpected or missing arguments within offerArgs.

Contract code should be careful interacting with offerArgs. These values need input validation before being used by the contract code since they are coming directly from the user and may have malicious behavior.

The OfferToReturns return value is a promise for an object containing the userSeat for the offer to the other contract, and a promise (deposited) that resolves when the payout for the offer has been deposited to the toSeat. Its two properties are:

  • userSeatPromise: Promise<UserSeat>
  • deposited: Promise<AmountKeywordRecord>
js
const { userSeatPromise: AMMUserSeat, deposited } = zcf.offerTo(
  swapInvitation,
  keywordMapping, // {}
  proposal,
  fromSeat,
  lenderSeat
);

prepareRecorderKitMakers(baggage, marshaller)

Convenience wrapper for DurablePublishKit and Recorder kinds.

TIP

This defines two durable kinds. Must be called at most once per baggage.

  • makeRecorderKit is suitable for making a durable RecorderKit which can be held in Exo state.
  • makeERecorderKit is for closures that must return a subscriber synchronously but can defer the recorder.
js
@param {import('@agoric/vat-data').Baggage} baggage
@param {ERef<Marshaller>} marshaller

Source: @agoric/zoe/src/contractSupport/recorder.js#L215